Introducing the Tigon tank, an easy-to-use ‘child safe’ compact tank from ASPIRE. It comes in four stylish colour finishes, Stainless Steel, Blue, the ever-popular Rainbow, and Black. It can be used as an MTL (mouth to lung) or a restricted DTL (direct to lung) vape. Whichever size you choose, you can be sure of a great performing tank with great flavour and vapour production. It is the first Aspire tank to use an ingenious design that will seal the wicking holes in the tank when the coil is removed.

The easy maintenance Aspire Tigon tank is of course removable and as previously stated comes in a 2ml TPD version, with interchangeable 510 drip tips for either MTL or DTL style vaping.

The Tigon tank comes supplied with a choice of MTL, longer style, drip tip and a slightly wider bore ‘stubby’ style drip tip more suited to restricted DTL hits.

The filling couldn’t be simpler in a child-proof/leak-proof tank of this type. First, pull up on the top cap, then with your thumb or finger on the marker, slide open the top cap to reveal the silicon leakproof seal of the fill port. The silicon fill port on the TPD version tank has a self-sealing valve into which you can insert your chosen filling bottle nozzle to fill the tank. Closing the tank is the opposite, slide the top cap back into place covering the silicon seal and push down.
Remember, when using a new coil, to let the cotton of the coil saturate in the e-liquid for 5 minutes or so before you start to vape. This will ensure that you don’t get dry hits or damage to the coil.

On the Aspire Tigon tank, coil replacement is just a case of unscrewing the base hardware, pulling out the old coil and replacing it with a new one. Then screw the base hardware back on again. Note that the Tigon tank can still hold e-liquid when changing the coil, this is because the wicking holes in the tank are covered by a spring-loaded sleeve that will slide shut sealing the holes when the coil is removed. Remember, before using a coil for the first time let it stand for 5 minutes after filling it with e-liquid to saturate the coil and avoid dry hit and damage to the coil.

When removing and/or replacing the glass tube on the childproof TPD version of the tank, you need to follow these steps. First, unscrew and remove the base hardware and pull out the coil. Then invert the tank and using the special key provided, unlock the top hardware by placing it in the slot of the screw holding the top hardware (see diagram). Next, remove the glass tube. Replace the glass tube and follow the steps in reverse, (it is easier to place the screw onto the key first to locate it into the top hardware), secure the screw, insert the coil and replace the base hardware. Remember, before using a coil for the first time let it stand for 5 minutes after filling it with e-liquid to saturate the coil and avoid dry hit and damage to the coil.

The first Aspire product to use an ingenious design that will seal the wicking holes in the tank when the coil is removed.

---

Contents

TPD Version:

1* Tigon tank(2.0ml) / 1* Glass tube / 2* Ni80 Coils (1*1.2Ω & 1*0.4Ω preinstalled) / 1* Screw adjustment tool / 10* O-rings / 1* Extra drip tip / 1* User manual / 1* Warranty card