Reax Mini Kit – Aspire
Aspire now brings you a great new Reax “mini’ kit. Introducing a flexible, easy to operate and very portable kit, The Reax Mini comes supplied with the latest Tigon tank for convenience and ease of use, with just a few clicks of a button to change the six pre-set wattage options. It has an in-built battery for easy maintenance and charging.
It comes in four super colours, Silver, Blue, Purple and Black. All have the new latest Tigon tank in complementary colours.
Reax Mini Vape Kit Dimensions
The Reax Mini kit is very portable with a sleek minimalist design, it fits as easily in the pocket or purse as it does in the hand. It is very ergonomic and comfortable to hold thanks to its rounded sides and corners. With 6 easy-to-choose optional wattage settings and automatic bypass settings when the resistance is below 1.0 ohms, it is quite flexible for a mod of this size. Additionally, the 1600mAh in-built battery should get you through a full day of vaping depending on use.
Aspire Reax Filling
The filling couldn’t be simpler in a childproof/leak-proof tank of this type. First, pull up on the top cap, then with your thumb or finger on the marker, slide open the top cap to reveal the leak-proof silicon seal of the fill port. The silicon fill port on the TPD version tank has a self-sealing valve into which you can insert your chosen filling bottle nozzle to fill the tank. Closing the tank is the opposite, slide the top cap back into place covering the silicon seal and push down. Remember, when using a new coil, let the cotton of the coil saturate in the e-liquid for 5 minutes or so before you start to vape. This will ensure that you don’t get dry hits or damage to the coil.
When the device is on press the fire button and the indicator light will indicate your device’s current charge. When its current charge capacity is above 3.8 volts the indicator light will be green. When the charge is between 3.5 and 3.8 volts the light will be blue. When the charge drops below 3.5 volts the light will turn red to remind you that it is time to charge.
The bottom wattage display acts as the switch (mode button) to adjust the output wattage, the bottom wattage display will light the corresponding output power value: 8W, 10W, 12W, 14W, 16W, and bypass. Note: The output wattage can only be adjusted when the resistance of the connected coil is detected to be equal to, or higher than 1.0Ω; when the coil resistance is less than 1.0Ω, the output mode is automatically in bypass mode, therefore, it cannot be adjusted.
The Reax Mini kit comes with all the safety features that Aspire is famous for.
There are no reviews yet.