Big Baby Beast Tank
TFV8 Big Baby is the enlarged version of Baby Beast – TFV8 Baby.
It adopts new engines: V8 Baby-X4 Core, V8 Baby-T6 Core and V8 Baby RBA. Meanwhile, both 5ml bigger e-juice capacity and more vapors will let you enjoy pleasant vaping time.
Big Baby Beast Tank is the updated and enlarged edition of the high-performance TFV8 Baby Beast, increasing the chassis diameter to 24.5mm with 5mL juice capacity while maintaining the tremendous capabilities and range of the original.
TOP REFILL SYSTEM
Top refill system makes filling as easy as it gets. Leak proof e-liquid slot can significantly solve leaking problem.
A structural evolution of the Baby Beast, the TFV8 Big Baby measures a 24.5mm diameter form factor, retaining the signature hinge-and-lock system to expose the e-juice port that leads to the 5 milliliters juice reservoir despite the increase in size, the TFV8 Big Baby Beast provides a flavour-enhanced experience and the cloud-chasing potential with the utilization of the Baby Turbo Engines coil family.
Designed with the perfect balance between flavors and performance, the included V8 Baby-T6 Core have an output range of 40 to 130W.
Adjustable Airflow System
Bring you an extremely open draw. Airflow can be adjusted freely by turning the ring at the base of atomizer.
Internal airflow is immense for its structure, integrating wider dual air slots around the base of the structure for adept airflow efficiency. The included Delrin wide bore drip tip maintains high level of heat dissipation for use throughout the day, completing the performance-orientated platform. Built upon a critically-acclaimed platform from one of the most respected manufacturing house in the industry, the TFV8 Big Baby Tank by Smok-tech is an essential addition for compact and every day carry atomizer system.
SMOK TFV8 Big Baby Beast Tank Features
- Enlarged Edition of the Baby Beast
- 24.5mm Diameter
- 5mL Juice Capacity
- Superior Stainless Steel Construction
- High-Grade Glass Reinforcement
- Convenient Top-Fill Design with Hinge Lock
- Dual Adjustable Airflow Control at Base
- Black Delrin Ultra-Wide Drip Tip
- Patented Baby Turbo Engines Coil Structure
- 0.4ohm V8 Baby-Q2 Dual Coil – rated for 30-80W | recommended 55-65W
- 0.15ohm V8 Baby-X4 Quad Coil – rated for 30-70W | recommended 45-60W
- 0.15ohm V8 Baby-T8 Octuple Coil – rated for 50-100W | recommended 60-80W
- V8 Baby RBA – Two-Post Deck
- 510 Connection
- Available in Stainless Steel
SMOK Big Baby Edition Package Includes
- SMOK TFV8 Big Baby Tank
- Preinstalled V8 Baby-X4 Coil Head
- Extra V8 Baby-T6 Coil Head
- V8 Baby RBA
- Replacement Glass Tube
- 510 Drip Tip Adapter
- Spare Parts
- Instruction Manual
HOW TO BUILD THE RBA
For a more silky and unique flavor experience, the V8 Baby-X4 provides immense flavor notes of your favorite e-juice, with a range of 30 to 70W. The option V8 Baby RBA head caters to building enthusiasts and is highly capable, integrating a two-post design for intuitive coil configurations.
1 . Before starting, make sure your hands are clean
2. Take RBA deck apart
3. Install and position the pre-wrapped coil. Place the coil between the posts and wrap the ends around the screws and tighten up, once all is in place, make sure the coil is fixed in the center and lined up with the air hole, and also make sure the coil is NOT touching the base
4. Cut the excess ends of the wire off
5. Cut a strip of cotton and make sure it’s not too much and not too little
6. Insert the cotton and placing it in the middle of the coil
7. Cut the cotton at an angle and make sure it’s not too short and not too long
8. Wet the coil with your e-liquid and adjust the cotton
Warning: Coils must be checked for resistance before they are fired on a device, and re-checked periodically to ensure the resistance remains the same.