iStick Power | Eleaf

   

Introduction

The iStick Power comes with an ultra-large battery capacity of 5000mAh in a compact design, which can last you for a remarkably long time at any power setting. Not only does it apply the new firmware with Smart mode and custom logo, the iStick Power also has a fashionable look and comes in three attractive colours.

 Download Manual Below

 

---

 Features

Size: 49.5mm x 23.5mm x 83.5mm Thread type: 510 thread Output mode: VW/Bypass/Smart/TC(Ni,Ti,SS,TCR-M1,M2,M3) Mode Output wattage: 1-80W 5000mAh Internal Battery Resistance range: 0.05-1.5ohm (TC modes) 0.1-3.5ohm (VW/Bypass/Smart mode) Temperature range: 100－315℃/200－600℉ (TC modes) New VW Interface Dual Circuit Protection Colours: Grey, Brushed Silver and Bronze

---

---

The Latest Firmware

It applies the latest firmware which features a new VW interface, Smart mode and custom logo. Firmware upgrading: the firmware can be upgraded by connecting the device to a computer through the USB port via a micro USB cable.  Download the file below to put a custom logo in iStick Power.

---

Various Modes with 80W Output

The iStick Power allows an intelligent yet satisfying draw with 80W maximum output and provides you with different vaping experiences with switchable VW/Bypass/Smart/TC(Ni,Ti,SS,TCR) modes.

Dual Circuit Protection

The circuit protection system has both software and hardware battery protections against over-charging, over-current and over-discharging.

---

 

510 Spring Connector

It also retains stainless steel spring-loaded 510 connectors for strong wear resistance and high adaptability.

 

---

     

Functions of Micro USB Port

Charging: the iStick Power can be charged through a USB port at the bottom of the device via a 1A wall adapter or a computer.

   

---

   

 

Newly Added Reset Function

The iStick Power can be reset by keeping holding the up button and reset button simultaneously in case it could not be powered on after an upgrade.

   

---