[ux_banner height="500px" bg="47746"] [text_box width="65" position_x="0" position_y="80"]

WOTOFO STNG MTL RDA

[/text_box] [/ux_banner] [section bg_color="rgb(19, 18, 18)"] [row v_align="middle"] [col span="6" span__sm="12" color="light"]

INTRODUCING THE
STNG MTL RDA!

WOTOFO STNG MTL RDA is co-designed by the YouTube reviewer Vapor Place (a.k.a Uncle Stas), a Russian vaper with informative tutorials on his vaping channel. It is 22mm in diameter and serves to meet the demands of all mouth-to-lung or nic salts vapers.

[/col] [col span="6" span__sm="12"] [ux_image id="47741" image_size="original"] [/col] [/row] [/section] [section bg_color="rgb(19, 18, 18)"] [row v_align="middle"] [col span="6" span__sm="12"] [ux_image id="47744" image_size="original"] [/col] [col span="6" span__sm="12" color="light"]

MTL-FOCUSED DRIP TIP
COMES RIGHT ONTO THE TOP

The narrow looking drip tip appears pretty nice with the overall design of this rebuildable dripping atomizer. The drip tip features 510 connection to meet the market standard. It fits into your mouth perfectly when doing mouth-to-lung inhales. It’s made to let you enjoy your thick and rich draws of nicotine hits mouth to lung.

[/col] [/row] [row v_align="middle"] [col span="6" span__sm="12" color="light"]

CONTROLLED AIRFLOW FALLS INTO
THE CATEGORY OF CLASSIC DESIGN

The STNG MTL RDA features a droplet shaped air control design on its top cap. This amazing and classic design allows users to set their favorite air flow as freely as possible. The droplet air inlet resides on only one side of the top cap, so do put that side onto the deck side with air hole on.

[/col] [col span="6" span__sm="12"] [ux_image id="47740" image_size="original"] [/col] [/row] [row v_align="middle"] [col span="6" span__sm="12"] [ux_image id="47739" image_size="original"] [/col] [col span="6" span__sm="12" color="light"]

SINGLE-SIDED AIR INLET
INTEGRATED WITH DUAL CHANNELS

On entering the single-sided air inlet, the air is pulled into the centre of the deck bottom and redirected into two air channels that are right underneath the coil spot, supplying double airflows right onto the coil. Such air splitting system provides soft and optimal vaporization.

[/col] [/row] [row v_align="middle"] [col span="6" span__sm="12" color="light"]

COIL INSTALLING
IS WITH EASE

The spring-loaded post clamps are T-shaped to give convenient mounting for different coil directions. No need to remove the screws when installing coil, just loosening the screws a little will do. The coil is secured by top mounted Phillip screws on two sides, positioned right above the air supply holes.

[/col] [col span="6" span__sm="12"] [ux_image id="47743" image_size="original"] [/col] [/row] [row v_align="middle"] [col span="6" span__sm="12"] [ux_image id="47745" image_size="original"] [/col] [col span="6" span__sm="12" color="light"]

SIMPLE, COMPACT
AND SQUONK-FRIENDLY

The STNG MTL RDA is simple and compact in appearance. Bottom feeding is adopted to make juice feeding much easier, since MTL drip tips are basically all narrow in shape which makes direct dripping from drip tip impossible. But you can still pull off the top cap to do drips if you are more of a dripper person, just replace the squonk pin with the solid pin from the accessory bag.

[/col] [/row]

Colours Available

[ux_image id="47742" image_size="original"] [ux_banner height="300px" bg="47753"] [ux_image id="47754" image_size="original" width="10" position_x="50" position_y="50"] [/ux_banner] [row] [col span="4" span__sm="12" color="light"] [/col] [col span="4" span__sm="12" color="light"] [/col] [col span="4" span__sm="12" color="light"]

WHAT’S IN THE PACKAGE

[/col] [/row] [row v_align="middle" h_align="center"] [col span__sm="12" align="center"] [ux_image id="47748" image_size="original" width="50"] [/col] [/row] [/section]