Aspire Puxos Kit

Aspire Puxos Kit

Aspire now brings you the ultimate in mod adaptability and flexibility. Introducing the new Puxos Kit. It allows for use with three different battery types, a 18650, a 20700 or a 21700. it also comes with the all-new Aspire Cleito Pro tank, which is just as flexible as it accepts coils from Cleito and Cleito Exo tanks. The Puxos can be used in various modes, allowing you to select between Wattage, Voltage, Bypass, CPS (C1/C2/C3), TC(Ni/Ti/SS316L) and TCR(M1/M2/M3).

A very portable kit that is comfortable to hold and fits equally well in a purse or pocket.

Aspire Puxos Kit Finishes

Choose from plain colours black, silver, white, blue, gold, red and pink. You could even mix and match your side panels.

Cleito Pro Filling

Now even easier to fill thanks to a top side-fill slot – no need to unscrew. Slide up the top ring to reveal the filling slot and fill it with your preferred e-liquid.

Cleito Pro coil Installation

Fitting or replacing the coils in the Cleito Pro couldn’t be simpler, unscrew the Delrin drip tip, remove the top section, then unscrew and remove the coil (if fitted) and screw in the new coil. Remember to let the coil stand for a few minutes to thoroughly saturate the wicking material before vaping.

Battery Installation

Remove the magnetic side panel and insert the battery of your choice, a 18650 (use the supplied adapter), a 20700 or a 21700. Insert the battery negative post down as seen in the diagram and replace the side pane

Dual Output Modes

* When using a 18650 battery, it must be mounted in the supplied adapter. * When using a 20700 battery, select the same output as the 21700 battery.

Puxos Mod Safety Features

The Puxos kit comes with all the safety features that Aspire is famous for.

Charging

Charging couldn't be easier, just attach the supplied micro USB cable to the charging port and attach it to a power supply. When you connect your Puxos mod to the charger the screen will display a growing battery icon. When the battery charge reaches 4.2V or is fully charged, the mod will stop charging and the screen will remain off. The maximum charging rate is 2 amps.

Kit Contents

TPD version: 1* Puxos mod / 1* Cleito Pro tank(2ml) / 2* Coils (0.5Ω) / 6* O-rings / 1* USB Cable / 1* 21700 battery / 1* 18650 battery adapter preinstalled / 1* Warning card / 1* User manual 1* Warranty card